When it comes to the Turbo Mixer and the issue of running too fast or too slow, the issue is almost always attributed to the Potentiometer; this can be found at the bottom of the unit and can be accessed with a small Philips head screwdriver.

1. Ensure that the unit is powered on and the speed knob is turned all the way down
2. Use a screwdriver to access the potentiometer and turn right VERY SLOWLY, as it does not take much to get the motor going
3. Make adjustments until you have the Plus/Minus .5% of 3000 RPMs
4. Test unit.

SNR-7.5.1-W-004 | Rev 0