MXU Motor Drive Board Repair Instructions
* Purpose This work instruction describes the process for replacing the MXU Motor Drive Board. These repair instructions are valid for revision C MXU Digital Centrifuges. For revisions older than C, please consult Product Development. * Equipment/Software ITEM # PART # DESCRIPTION QTY. …
MX12 Lid Latch Repair
* Purpose This work instruction describes the process for replacing the lid latch on MX12 centrifuge units. * Equipment/Software Replacement Lid Latch (101078-D) Attachment Screws, M4 x 8mm, button head hex drive, stainless steel 2.5mm hex driver * Instructions * Check that you have all necessary c…
MX12 Base Conversion Instructions
* Purpose This work instruction describes the process for converting the base of MX12 centrifuge units. These repair instructions are valid for Revision G MX12 Centrifuges. For revisions older than G, please consult Product Development. * Equipment/Software: ITEM # PART # DESCRIPTION QTY. …
Turbo Mixer Troubleshooting
When it comes to the Turbo Mixer and the issue of running too fast or too slow, the issue is almost always attributed to the Potentiometer; this can be found at the bottom of the unit and can be accessed with a small Philips head screwdriver. * Ensure that the unit is powered on and the speed knob is turned all t…
